| HOME > Products > Optical Measurement > 10Gbps Serial Bit Error Rate Tester [BERT] |
10Gbps Serial Bit Error Rate Tester <SeBERT-100 Series>
- 10Gb/s BERT with SFP+/XFP Module Slot -
|
Se BERT-100 is an integrated Pseudo-random Bit Sequence (PRBS)
generator and a Bit Error Rate receiver with a built-in module slot for
either SFP+ or XFP transceivers. The PPRBS outputs optical NRZ waveform
with bit rate within 9.95~11.32 Gbps, with settable data pattern of 27-1, 223-1, 231-1 and a fixed 64-bit user-defined pattern. An electrical PRBS also can
be accessed from the front panel. Data pattern is set by PC software and
BER test results are displayed on PC.
|
 |
Download
Datasheets |
Key Futures |
 Bit rates from 9.95 ~ 11.32 Gb/s
PRBS 27-1, 223-1, 231-1, and 64bit definable
Pre-emphasis output signal functionality
SFP+/XFP module slot
Computer control via USB
Low cost
|
Applications |
Optical components and fiber link testing for SONET OC192/ SDH-STM 64,
10 Gigabit Ethernet (10 GbE) applications.
Low cost TX/RX device inspection line
Data transmission experiments
|
Typical Performance
|
 |
|
 |
| Fig.1 Electrical eye-diagram at 10Gb/s |
|
Fig.2 Signal with pre-emphasis. |
 |
|
|
| Fig.3 Measured BER plot with an XFP module. |
|
|
|
|
|
|
