EDFA
|
SLD/SLED |
 Standard EDFA
High Power EDFA
CATV EDFA
Packet Switching
Pre-Amplifier
Booster Amplifier
Inline
PM & C+L band EDFA
Short Pulse Amplifier
Ultra Low-Noise Amplifier
|
SLEDs
Multi-Band SLEDs |
| RAMAN Amplifier |
ASE Light Source |
C-Band Raman
C+L Band Raman
Raman Pump
|
1050nm ASE
C-Band ASE
C+L Band ASE |
| SOA |
|
| SOA |
|
|
|
| Standard EDFA Specifications |
| Parameter |
SFA-200-13 |
SFA-200-18 |
SFA-200-23 |
SaturationOutput Power
(at -3dBminput signal) |
>+13 dBm |
>+18 dBm |
>+23 dBm |
Small-Signal gain at
1550nm
(at -30 dBminput signal) |
>30 dB |
>32 dB |
>37 dB |
Noise Figure (typ.)
(at -3 dBminput signal) |
5.0 dB |
5.5 dB |
6.0 dB |
| OperatingWavelength |
1528nm- 1565nm |
| Input Isolation |
>30dB |
| Output Isolation |
>30dB |
>PolarizationDependent
Gain |
<0.3 dB |
| ControlMode |
ACC(Standard), APC& AGC) |
|
| *Other output power models are avaliable upon request |
|
| General Enviromantal Parameters |
| Parameter |
Unit |
Specification |
| Operation Temperature Range |
℃ |
0 to +40 |
| Storage Temperature Range |
℃ |
-10 to +70 |
| Power Supply |
VAC |
80 - 240, 43 - 63Hz |
| Dimensions |
mm |
250(W) x 300(L) x 100(H) |
| Control |
- |
Keylock switch, optical output power |
| LCD Display |
- |
Output power,
Pump laser temperature |
| Computer Interface |
- |
RS232 (Labview control software & connection cable
inculded) |
| Protection |
- |
Pump laser over heat warning |
| Optical Connector |
- |
FC/APC, FC/UPC, SC/APC, SC/UPC |
| Optical Fiber |
- |
SMF-28 |
|
|
|
